Advanced CLI

Calibration related CLI

1. To perform solar attenuation calibration using noise diode, use run-meer-fluxcal .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-fluxcal", line 5, in <module>
    from meersolar.meerpipeline.do_fluxcal import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

2. Parition calibrator scans from main measurement set, use run-meer-partition .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-partition", line 5, in <module>
    from meersolar.meerpipeline.do_partition import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

3. Flagging of calibrators, use run-meer-flag .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-flag", line 5, in <module>
    from meersolar.meerpipeline.flagging import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

4. Simulate visibilities for calibrators, use run-meer-import-model .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-import-model", line 5, in <module>
    from meersolar.meerpipeline.import_model import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

5. Perform basic calibration, use run-meer-basic-cal .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-basic-cal", line 5, in <module>
    from meersolar.meerpipeline.basic_cal import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

6. Apply basic calibration solutions, use run-meer-apply-basiccal .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-apply-basiccal", line 5, in <module>
    from meersolar.meerpipeline.do_apply_basiccal import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

7. Split measurement set for self-calibration or final imaging, use run-meer-split .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-split", line 5, in <module>
    from meersolar.meerpipeline.do_target_split import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

8. Perform self-calibration, use run-meer-selfcal .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-selfcal", line 5, in <module>
    from meersolar.meerpipeline.do_selfcal import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

9. Apply self-calibration solutions, use run-meer-apply-selfcal .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-apply-selfcal", line 5, in <module>
    from meersolar.meerpipeline.do_apply_selfcal import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

Solar specific CLI

1. To correct sidereal motion of the Sun, if the Sun is not tracked by the correlator delay center, use run-meer-solar-siderealcor . This is useful for observations where the Sun is in sidelobe of the telescope primary beam.

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-solar-siderealcor", line 5, in <module>
    from meersolar.meerpipeline.do_sidereal_cor import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

2. Make dynamic spectra of solar scans, use run-meer-makeds .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-makeds", line 5, in <module>
    from meersolar.meerpipeline.meer_make_ds import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

Imaging related CLI

1. Perform spectro-polarimetric snapshot imaging, use run-meer-imaging .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-imaging", line 5, in <module>
    from meersolar.meerpipeline.do_imaging import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

2. Perform primary beam correction of MeerKAT primary beam, for a single image, use run-meer-singlepbcor .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-singlepbcor", line 5, in <module>
    from meersolar.meerpipeline.single_image_meerpbcor import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address

2. Perform primary beam corrections of MeerKAT primary beam for all images in a directory, use run-meer-meerpbcor .

Click here to see parameters

Traceback (most recent call last):
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/bin/run-meer-meerpbcor", line 5, in <module>
    from meersolar.meerpipeline.meer_pbcor import cli
  File "/home/docs/checkouts/readthedocs.org/user_builds/meersolar/envs/v3.0.0/lib/python3.10/site-packages/meersolar/__init__.py", line 7, in <module>
    username = os.getlogin()
OSError: [Errno 6] No such device or address